|
Scratch-B-Gone™ is a soft-metal restoration kit. It is designed to remove scratches, as well as blending and oxidizing the newly restored metal to match the surrounding areas. Scratch-B-Gone™ has been used successfully on a commercial basis for over 5 years. With a proven record of successful results it has demonstrated to be effective to major appliance manufactures, retailers and service professionals.
The Stainless Steel Scratch-B-Gone™ tool works to realign any unwanted cross-grain scratch back to its desired original direction, recreating the manufacturer's grain imprint. Your kit comes with everything you need to remove even the most challenging scratches. The required effort will vary according to the degree of damage to the surface and grain. You can also use the Stainless Steel Scratch-B-Gone™ tool to remove rust, stains and water spots. NOTE:Scratch-B-Gone™ will NOT remove dents or dings in the metal.
The Scratch-B-Gone™ home and professional kits can do large jobs such as restoring your appliance, sink or grill's scratched or scuffed surface to a like-new finish. Small jobs like a single scratch can benefit from using Scratch-B-Gone™ Zip kit as it is not necessary to refinish the entire surface. It will effectively remove even deep scratches while working only a few inches around the scratch.
Scratch-B-Gone™ will not only remove most scratches but will also effectively blend and oxidize the metal surface area through the use of the proprietary formulation "ULTRA SHINE™". This revolutionary new solution, combined with the comfort grip tool and specialized pads found in the Scratch-B-Gone™ kit, will enable you to realign the grain to match the surrounding surface. The blending and oxidation process will eliminate the "bright spots" usually associated with scratch removal and will provide a like-new finish to your appliance. Scratch-B-Gone™ is user friendly, non-toxic and environmentally safe.
Stainless Steel Scratch-B-Gone™ is safe for all brushed ‘real’ Stainless steel surfaces. However, it is important to note, that some manufacturers may apply a clear coat protective finish to the doors, trim pieces and handles to reduce tarnishing or discoloration. Some manufacturers use the following phrases to identify the clear coated appliances: Easy Care, Smudge Free, Satina, Clean Steel, Titanium and others. Before refinishing your appliance, please be sure to check with the manufacturer to find out if a protective coating or synthetic finish has been applied to the surface you are planning to refinish. READ THESE INSTRUCTIONS COMPLETELY AND VIEW VIDEO DEMONSTRATION ON CD BEFORE STARTING ANY REPAIR!
|
